Поиск

Полнотекстовый поиск:
Где искать:
везде
только в названии
только в тексте
Выводить:
описание
слова в тексте
только заголовок

Рекомендуем ознакомиться

'Документ'
Однозначных рекомендаций на все случаи жизни при попадании в криминогенные ситуации нет, так как они зависят от многих факторов. Поэтому целесообразно...полностью>>
'Документ'
С целью обеспечения конституционного права граждан на получение доступного и бесплатного общего образования, на основании Закона Российской Федерации ...полностью>>
'Рабочая программа'
Рабочая программа учебного курса математика для 5 класса составлена на основе Примерной программы основного общего образования по математике и програм...полностью>>
'Конкурс'
Оформить папку документов, содержащую копии документов, подтверждающих количественные показатели, указанные в электронной заявке. Копии документов нео...полностью>>

Главная > Документ

Сохрани ссылку в одной из сетей:
Информация о документе
Дата добавления:
Размер:
Доступные форматы для скачивания:

SECTION 07310

WOODLAND LIFETIME DESIGNER SHINGLES

Specifier’s notes and tools are shown in blue and will not print and/or interrupt formatting unless specifically required. To print all hidden text, select TOOLS / OPTIONS / PRINT / HIDDEN TEXT from your toolbar

  1. GENERAL

    1. 0SECTION INCLUDES

      1. Asphalt roofing shingles.

      2. Leak barrier and roof deck protection.

      3. Metal flashing associated with shingle roofing.

      4. Attic ventilation.

    2. 0RELATED SECTIONS

***Delete sections below not relevant to this project***

      1. Section 06100 - Rough Carpentry: Framing, wood decking, and roof sheathing.

      2. Section 07620 - Flashing and Sheet Metal: Sheet metal flashing not associated with shingle roofing; gutters and downspouts.

      3. Section 08630 - Unit Skylights: Skylights

    1. REFERENCES

***Delete references below not relevant to this project***

      1. American Society for Testing and Materials (ASTM) - Annual Book of ASTM Standards

        1. ASTM A 653/A 653M - Standard Specification for Steel Sheet, Zinc Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.

        2. ASTM B 209 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate.

        3. ASTM B 370 - Standard Specification for Copper Sheet and Strip for Building Construction.

        4. ASTM D 3018 - Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules.

        5. ASTM D 3161 - Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method).

        6. ASTM D 3462 – Standard Specification for Asphalt Shingles Made From Glass Felt and Surfaced with Mineral Granules.

        7. ASTM D 4586 - Standard Specification for Asphalt Roof Cement, Asbestos-Free.

        8. ASTM D 7158 - Standard Test Method for Wind-Resistance of Sealed Asphalt Shingles (Uplift Force/Uplift Resistance Method).

***ENERGYSTAR rated only***

        1. ASTM C 1549 - Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer.

        2. ASTM E 903 – Standard Test Method for Solar Absorptance, Reflectance, and Transmission of Materials Using Integrating Spheres.

      1. Underwriters Laboratories (UL) - Roofing Systems and Materials Guide (TGFU R1306)

        1. UL 790 - Tests for Fire Resistance of Roof Covering Materials.

        2. UL 997 - Wind Resistance of Prepared Roof Covering Materials.

***Impact Resisant Shingles Only****

        1. UL 2218 – Impact Resistance of Prepared Roof Covering Materials.

      1. Asphalt Roofing Manufacturers Association (ARMA)

      2. Sheet Metal and Air Conditioning Contractors National Association, 1nc. (SMACNA) - Architectural Sheet Metal Manual.

      3. National Roofing Contractors Association (NRCA)

      4. American Society of Civil Engineers (ASCE).

        1. ASCE 7 - Minimum Design Loads for Buildings and Other Structures.

***LEED Certification Only***

      1. U.S. Green Building Council (USGBC)

      2. Leadership in Energy and Environmental Design (LEED)

      3. ENERGY STAR

      4. Cool Roof Rating Council (CRRC)

      5. Miami Dade County

    1. DEFINITIONS

      1. Roofing Terminology: Refer to ASTM D1079 and the glossary of the National Roofing Contractors Association (NRCA) Roofing and Waterproofing Manual for definitions of roofing terms related to this section.

    2. LEED CERTIFICATION

***LEED Certification Only***

      1. Provide a roofing system that will achieve or aid in the qualification of points satisfying

        1. Sustainable Site credit 7.2 - Heat Island Effect - Roof.

        2. Materials & Resource credit 5 - Local and Regional Materials.

    1. SUBMITTALS

      1. Submit copies of GAF® product data sheets, detail drawings and samples for each type of roofing product.

***LEED Certification Only***

      1. L.E.E.D. submittal: Coordinate with Section 01115 - Green Building Requirements, for LEED certification submittal forms and certification templates.

    1. QUALITY ASSURANCE

      1. Manufacturer Qualifications: Provide all primary roofing products, including shingles, underlayment, leak barrier, and ventilation, by a single manufacturer.

      2. Installer Qualifications: Installer must be approved for installation of all roofing products to be installed under this section.

    2. REGULATORY REQUIREMENTS

      1. Provide a roofing system achieving an Underwriters Laboratories (UL) Class A fire classification.

***ENERGYSTAR rated only***

      1. Provide a roofing system achieving an ENERGYSTAR rating.

      2. Install all roofing products in accordance with all federal, state and local building codes.

      3. All work shall be performed in a manner consistent with current OSHA guidelines.

    1. PREINSTALLATION MEETING

      1. General: For all projects in excess of 250 squares of roofing, a pre-installation meeting is strongly recommended.

      2. Timing: The meeting shall take place at the start of the roofing installation, no more than 2 weeks into the roofing project.

      3. Attendees: Meeting to be called for by manufacturer’s certified contractor. Meeting’s mandatory attendees shall include the certified contractor and the manufacturer’s representative. Non-mandatory attendees shall include the owner’s representative, architect or engineer’s representative, and the general contractor’s representative.

      4. Topics: Certified contractor and manufacturer’s representative shall review all pertinent requirements for the project, including but not limited to, scheduling, weather considerations, project duration, and requirements for the specified warranty.

    2. DELIVERY, STORAGE, AND HANDLING

      1. 0Store all products in manufacturer's unopened, labeled packaging until they are ready for installation.

      2. Store products in a covered, ventilated area, at temperature not more than 110 degrees F (43 degrees C); do not store near steam pipes, radiators, or in direct sunlight.

      3. Store bundles on a flat surface. Maximum stacking height shall not exceed GAF®’s recommendations. Store all rolls on end.

      4. Store and dispose of solvent-based materials in accordance with all federal, state and local regulations.

    3. WEATHER CONDITIONS

      1. Proceed with work only when existing and forecasted weather conditions will permit work to be performed in accordance with GAF®’s recommendations

    4. WARRANTY

***Choose Warranty Option. ***

***Note: Contact GAF® for detailed warranty information***

      1. Provide to the owner a GAF® WeatherStopper® Golden Pledge Ltd Warranty covering:

***requirements for Golden Pledge Warranty***

        1. Roofs installed by a Certified GAF® Master Elite™ Contractor only.

        2. Manufacturing defects: 100% coverage for materials and labor for:

          1. Single family detached homes owned by individuals the first

***Select Applicable Product Term***

    - 50 years non-prorated, then 20% thereafter for all GAF lifetime shingles.

    - 20 years non-prorated, then 20% thereafter for GAF Marquis Weathermax and GAF Royal Sovereign Shingles.

          1. Any other type of owner or building – 40 years with the first 20 years non- prorated. (excludes Marquis WeatherMax and Royal Sovereign)

        1. Workmanship errors: 100% coverage for workmanship errors for:

          1. Single family detached homes owned by individuals - the first 25 years for after installation. (20 years for Marquis WeatherMax and Royal Sovereign)

          2. Any other type of owner or building - 20 years.

        2. Roof system NOT installed over an existing roof, all existing roof materials must be removed to the deck.

***StainGuard Labeled Shingles Only***

        1. Warranted against algae discoloration for 10 years

        2. Full roof installations (Roofs installed on portions of buildings do not qualify) using the following GAF® products.

          1. You must use GAF® Roof Deck Protection.

          2. You must use eligible GAF® Leak Barrier in valleys and around dormers, sidewalls, firewalls, chimneys, plumbing vents, and skylights. In the North, leak barriers must be used at all eaves at least 24 inch inside warm wall.

          3. You must use GAF® pre-cut starter strip products (only those with factory applied adhesive) at the eaves. Note: To obtain bonus wind coverage, you must use GAF® pre cut starter strip products (with factory applied adhesive) at the eaves and rakes and you must install each shingle using 6 nails. For Miami Dade County Florida, no adhesive on rakes. You must cement the starter strip in and nail along the rake.

          4. You must use eligible COBRA® ventilation with adequate intake ventilation. Master Flow® exhaust ventilation products can be substituted only if COBRA® ridge ventilation cannot be installed due to a structure’s architecture. In any event, adequate ventilation should meet the following requirements:

            1. Minimum net free ventilation area of 1 sq ft per 150 sq ft of ceiling area is required. When intake vents are located at the eaves and exhaust vents are located near the roof’s peak (in a properly balanced system) for maximum air flow, ventilation may be reduced to 1 sq ft per 300 sq ft. If these standards are not met, GAF® cannot be responsible for damage caused by inadequate ventilation.

          5. You must use GAF® Ridge Cap Shingles or shingles that correspond to the shingle product you are installing.

          6. You must use eligible GAF® Roofing Shingles.

          7. New metal flashings must be installed. Metal drip edge must be used at eaves and is recommended at rake edges.

        3. In addition to the requirements listed above, you installer must register and pay for this warranty. On projects that total more than 250 squares, the permanent Golden Pledge® Ltd Warranty will be issued only if the project passes GAF®’s final inspection. GAF® reserves the right to withhold the warranty if the roof has not been installed according to GAF®’s written application instructions. GAF® also strongly recommends that your Master Elite® Contractor schedule a start-up and at least one interim inspection on projects of 250 squares or more by contacting GAF® at least three weeks prior to the start of roof work.

      1. Provide to the owner a GAF® Weather Stopper® System Plus Ltd Warranty covering:

***Requirements for Systems Plus Warranty***

        1. Roofs installed by a Authorized Home Builder, Certified Contractor or Certified GAF® Master Elite™ Contractor only.

        2. Manufacturing defects: 100% coverage for materials and labor for:

          1. Single family detached homes owned by individuals the first

***Select Applicable Product Term***

    - 50 years non-prorated, then 20% thereafter for all GAF lifetime shingles.

    - 20 years non-prorated, then 20% thereafter for GAF Marquis Weathermax and GAF Royal Sovereign Shingles.

          1. Any other type of owner or building – 40 years with the first 20 years non- prorated. (excludes Marquis WeatherMax and Royal Sovereign)

***StainGuard Labeled Shingles Only***

        1. Warranted against algae discoloration for 10 years

      1. Provide to the owner a GAF® Smart Choice® Shingle Ltd. Warranty covering:

***Requirements for Smart Choice Warranty***

        1. Manufacturing defects: 100% coverage for materials for:

          1. Single family detached homes owned by individuals the first

***Select Applicable Product Term***

    - 10 years non-prorated, then 20% thereafter for all GAF lifetime shingles.

    - 5 years non-prorated, then 20% thereafter for GAF Marquis Weathermax and GAF Royal Sovereign Shingles.

    - 3 years non-prorated, then 20% thereafter for GAF Sentinel Shingles.

          1. Any other type of owner or building – 40 years with the first 5 years non - prorated.

***StainGuard Labeled Shingles Only***

        1. Warranted against algae discoloration for 10 years

      1. Provide to the owner a GAF® All American Pledge™ Guarantee

        1. Provide to the owner a GAF® WeatherStopper® Golden Pledge Ltd Warranty for the Steep Slope System covering:

          1. Roofs installed by a Certified GAF® Master Elite™ Contractor only.

          2. Manufacturing defects: 100% coverage for materials and labor for:

            1. Single family detached homes owned by individuals the first

***Select Applicable Product Term***

    - 50 years non-prorated, then 20% thereafter for all GAF lifetime shingles.

    - 20 years non-prorated, then 20% thereafter for GAF Marquis Weathermax and GAF Royal Sovereign Shingles.

            1. Any other type of owner or building – 40 years with the first 20 years non- prorated. (excludes Marquis WeatherMax and Royal Sovereign)

          1. Workmanship errors: 100% coverage for workmanship errors for:

            1. Single family detached homes owned by individuals - the first 25 years for after installation. (20 years for Marquis WeatherMax and Royal Sovereign)

            2. Any other type of owner or building - 20 years.

        1. Roof system NOT installed over an existing roof, all existing roof materials must be removed to the deck.

        2. Warranted against algae discoloration for 10 years

        3. Provide Manufacturers standard WeatherStopper® Diamond Pledge Guarantee for the Low Slop system covering:

***StainGuard Labeled Shingles Only***

          1. Single source Edge-to-Edge coverage* and no monetary limitation, where the manufacturer agrees to repair or replace components in the roofing system and pre-approved metal edge details, which cause a leak due to a failure in materials or workmanship.

            1. Duration: (20) Twenty years from the date of completion

  1. PRODUCTS

    1. MANUFACTURERS

      1. 0Acceptable Manufacturer: GAF®, 1361 Alps Rd. Wayne NJ 07470. Tel: 1-973-628-3000.

      2. Requests for substitutions will be considered in accordance with provisions of Section 01600.

    2. SHINGLES

      1. Heavyweight design, granule surfaced, self sealing asphalt shingle with a strong fiberglass reinforced Micro Weave core and StainGuard® protection, which prevents pronounced discoloration from blue-green algae through formulation/unique blends of granules. Speical cut tabs give the appearance of staggered slate. Meets ASTM D 3018, Type 1; ASTM D 3161, Type 1; ASTM D 3462 and ASTM D 7158, Class H, UL 790 Class A rated with UL 997 Wind Resistance Label. Woodland™ Lifetime Designer Shingles by GAF®.

        1. Color: As selected from manufacturers’ full range.

        2. Color: _____________

    3. HIP AND RIDGE SHINGLES

***Select All Applicable Products***

      1. High profile self sealing hip and ridge cap shingle matching the color of selected roof shingle. Each bundle covers approx. 20 lineal feet (6.10m). Timbertex® Premium Ridge Cap Shingles, by GAF®.

      2. Distinctive self sealing hip and ridge cap shingle complementing the color of selected roof shingle. Each bundle covers approx. 31 lineal feet (9.45m) with an 8 inch (203mm) exposure. Ridglass™ 12" Ridge Cap Shingles by GAF®.

      3. Distinctive self sealing hip and ridge cap shingle complementing the color of selected roof shingle. Each bundle covers approx. 31 lineal feet (9.45m) with an 8 inch (203mm) exposure. Ridglass™ 10” Ridge Cap Shingles by GAF®.

      4. Distinctive self sealing hip and ridge cap shingle complementing the color of selected roof shingle. Each bundle covers approx. 31 lineal feet (9.45m) with an 8 inch (203mm) exposure Ridglass™ 8” Ridge Cap Shingles by GAF®.

      5. Distinctive self sealing hip and ridge cap shingle complementing the color of selected roof shingle. Each bundle covers approx. 25 lineal feet (7.62mm) with a 6 2/3 inch (169mm) exposure. Seal-A-Ridge® Ridge Cap Shingles by GAF®.

      6. Distinctive hip and ridge cap shingle complementing the color of selected roof shingle. Each bundle covers approx. 33.3 lineal feet (10.15m) with a 5 5/8 inch (147mm) exposure. Z® Ridge Shingles by GAF®.

      7. Integrated cap shingle and ridge vent design shingle complementing the color of selected roof shingle. Each bundle covers approx. 20 lineal feet (6.10m) with a 9 ¼ inch (235mm) exposure and provides 10.65 sq. in./linear ft. of net free ventilating area. Vented RidgeCrest™ Venting Ridge Cap Shingles by GAF®.

    1. STARTER STRIP

***Select All Applicable Products***

      1. Self sealing starter shingle designed for premium roof shingles. Each bundle covers approx. 100 lineal feet (30.48m) for English and metric shingles or 50 lineal feet (15.24m) for oversized shingles. WeatherBlocker™ Eave/Rake Starter Strip by GAF®.

      2. Self sealing starter shingle designed for all roof shingles. Each bundle covers approx. 120 lineal feet (36.58m). ProStart™ Starter Strip by GAF®.

*** For Use With Grand Sequoia, Grand Canyon and Sienna Shingle Products***

      1. Pre-cut, color coordinated starter strip shingle designed as a second starter course for shingles with large cut-outs. Each bundle covers approx.. 60 lineal feet (18.29 m) Grand Sequoia® – Grand Canyon® Starter Strip by GAF®.

    1. LEAK BARRIER

***Select All Applicable Products***

      1. Self-adhering, self sealing, bituminous leak barrier surfaced with fine, skid-resistant granules. Approved by UL, Dade County, ICC, State of Florida and Texas Department of Insurance. Each roll contains approx. 150 sq ft (13.9 sq.m.), 36” X 50’ (0.9m x 20.3m) or 200 sq ft (18.6 sq.m.), 36” X 66.7’ (0.9m x 20.3m). WeatherWatch® Leak Barrier, by GAF®.

      2. Self-adhering, self sealing, bituminous leak barrier surfaced with a coated surface and added tack for extra traction. Approved by UL and ICC. Each roll contains approx. 200 sq ft (18.6 sq.m.), 36in. X 66.7ft. (0.9m x 20.3m) WeatherWatch® XT Leak Barrier, by GAF®.

      3. Self-adhering, self sealing, bituminous leak barrier surfaced with a smooth polyethylene film. Approved by UL, Dade County, ICC, State of Florida and Texas Department of Insurance. Each Roll contains approx. 200 sq ft. (18.6 sq.m.), 36” X 66.7’ (0.9m x 20.3m), and 60 mils thick. StormGuard® Leak Barrier, by GAF®.

      4. Self-adhering, self sealing, SBS modified waterproof leak barrier. Approved by UL, FM, Dade County, and State of Florida. Each roll contains approx. 200 sq ft (18.6 sq.m.), 39.4in. X 67.8ft. (1 m x 20.7m), UnderRoof™2 Waterproof Protection by GAF®.

      5. Self-adhering air & moisture barrier film surfaced SBS modified flashing. Roll sizes available in 7 different dimensions. Approved by Dade Country and Florida Building Code. Storm Flash™ Self-Adhering Flashing by GAF®.

    1. SHINGLE UNDERLAYMENT

***Select All Applicable Products***

      1. Premium, water repellant, breather type non-asphaltic underlayment. UV stabilized polypropylene construction. Meets or exceeds ASTM D226 and D4869. Approved by Dade Country, Florida Building Code, and ICC. Each roll contains approximately 10 squares (1003 sq. ft.) of material and is 54” x 223’. Deck-Armor™ Premium Breathable Roof Deck Protection, by GAF®.

      2. Synthetic, non-asphaltic, non-woven, anti-skid back coated, polypropylene constructed non breathable underlayment. Meets or exceeds ASTM D226 and D4869 approved by UL, Florida Building Code, ICC and CSA A220.1. Each roll contains approximately 10 squares (1000 gross sq. ft.) of material and is 48 in. x 250 ft. (14.6 m x 76.2 m), Tiger-Paw™ Roof Deck Protection by GAF®.

      3. Water repellent, breather type cellulose/glass fiber composite roofing underlayment. Meets or exceed ASTM D226 and D4869 and approved by UL and the Florida Building Code. Each roll contains approximately 4 squares (432 sq. ft.) of material and is 36” x 144” Shingle-Mate® Roof Deck Protection, by GAF®.

      4. Premium, all-purpose fiberglass reinforced SBS modified underlayment. Meets or exceeds ASTM D226. Approved by UL and ICC. Each roll contains 2 squares (20.06 sqm.) of material and is 39.37 in. x 65.8 ft. (1m x 20m), Roof Pro™ SBS Modified All-Purpose Underlayment by GAF®.

      5. Non-woven fiberglass mat underlayment coated on both sides suing a highly filled polymer. Provides a fire barrier and water resistant. Approved by Dade Country, Florida Building Code, and ICC approval. VersaShield® Fire-Resistant Roof Deck Protection by GAF®.

      6. #15 Roofing Underlayment – By Others: Water repellent breather type cellulose fiber building paper. Meets or exceeds the requirements of ASTM D-4869 Type I.

      7. #30 Roofing Underlayment - By Others: Water repellent breather type cellulose fiber building paper. Meets or exceeds the requirements of ASTM D-4869 Type II.

    1. ROOFING CEMENT

      1. Asphalt Plastic Roofing Cement meeting the requirements of ASTM D 4586, Type I or II.

    2. ROOF ACCESSORIES



Похожие документы:

  1. Книги: Англо-русский и русско-английский словарь пк

    Документ
    ... in frame ( window ) пригонка по размеру окна fit - out оборудование fit text to ... блокнот notes примечания notice объявление; предупреждение; извещение Not - OR (NOR ... отмечать, выделять select area выбранная область select options выбор режимов selected ...

Другие похожие документы..